How to Fix a Flat Tyre on a Truck

How to Fix a Flat Tyre on a Truck

If you are in the farming sector or you own a poultry, textile or construction company, you can not overestimate the value of maintaining your trucks. One of the most embarrassing setbacks is to get a puncture. Unforeseen tyre-complications can occur in the most inconvenient places, and these setbacks are almost impossible to predict. Therefore, the phone number of a tyre shop offering emergency tyre repair services should be kept on hand.

If you are a good DIY enthusiast, having the right equipment will help you change or repair a flat as soon as you need to minimise damage to your tyres. In this post, you will learn a few tips on flat tyre repair, instructions on how to change a wheel, a list of items required for a flat tyre and more. For a professional evaluation in Dandenong, you can also visit GILL VIC TYRES.

Why Is It Important to Get My Tyre Repaired?

If you are driving on a tyre that is continuously losing air or is punctured, it is crucial to have it inspected immediately; your safety depends on it. A professional should check the inside of the tyre to determine if it can be repaired or if it needs to be replaced. Hiring a professional to fix a flat tyre can help:

– Properly repair tread punctures

– Prevent further tyre damage

– Maintain tyre air pressure at the manufacturer’s recommended level.

There are, of course, situations where tyre repair is not the right solution. It would be best if you replace your worn tyre with a new one instead of trying to repair it in the following situations:

– If you notice a growth on the side of the tyre, you should replace it immediately. This is a sign that the tyre is no longer useful, and keeping it is dangerous.

– If a tyre has become soft from a blowout, it should be replaced immediately.

– If a tyre has been lacerated (or other significant damage), you should replace it immediately instead of trying any repairs.

How to Spot the Leak in Your Tyre


Do you notice a continuous loss of pressure in your tyre? Before attempting to repair the tyre, you will need to find the source of the leak.

– First, look for a screw, nail, or other debris in the tyre. The source of the leak may be hard to find, but here is a trick that will make it easy to locate.

– You’ll need a spray bottle filled with a soapy solution or a tyre manufacturer-approved leak detection solution.

– Inflate the tyre and then spray the entire tyre with your solution.

– As the solution flows into the grooves of the tyre, you should notice a burst of bubbles where your leak is.

Now that you have located the leak in your tyre, it is best to have it repaired by a professional who will plug the hole with a suitable part.

Make Sure You Always Have These Puncture Tools With You

When it’s time to change a tyre, you’ll be glad to have these tools handy:

– Your owner’s manual
– An inflated spare tyre
– A jack
– A wheel changer
– A piece of dunnage, such as a small piece of wood or brick.

How to Change a Flat Tyre:

Use this step-by-step guide if the need to change a tyre arises:

– First, it is essential to make sure your vehicle is parked away from traffic and on a flat surface.

TIP: Use your hazard lights or flashlights in heavy traffic.

– Next, place a piece of wood (brick, metal, etc.) in front and behind a tyre that will not be raised to improve stability.

– Then use the vehicle owner’s manual to find your spare tyre and jack.

– Check with your manual to make sure the jack is in the correct position to prevent damage.

– Start lifting the car with the jack, but don’t do it all the way up.

– Remove any hubcaps and centre covers to gain access to the bolts.

– Using the wheel changer, turn the bolts counterclockwise to loosen them.

– After making sure the jack is stable, raise the car enough to remove the tyre easily.

– Install the spare tyre and place the bolts correctly.

– Tighten the bolts securely with your wheel changer by turning them clockwise.

TIP: Make sure the bolts are tight but do not use excessive force. This could tip the truck off the jack.

– After driving a few miles, you should stop to check that the bolts are still tight.

Hope this post helps you out if ever you need truck tyre repairs. Remember to leave your comments and share your experience with our readers in the section below.

Leave a Reply

Your email address will not be published.